Main Menu

About Our Conversions.........

       We start by removing any excess wiring and plugs from your engine wiring harness to give it a cleaner look and eliminate unneeded systems. Any plugs that would have plugged into the donor vehicle are then removed as well. Any wiring you will need to connect the engine into your host vehicle is then run out cleanly and left accessable for you. All of the wires needed to run the engine will be clearly labeled for you to connect.
      At this point we install new relays and relay sockets for the "FUEL PUMP" and "COOLING FAN". Engine harnesses from vehicles which had a "MAIN" relay will be equipped with a new "MAIN" relay and socket also. A new standard (OBD II, GM OBD I, or Jumper connectors ) diagnostic link will also be wired into your harness at this time, saving you the hassle of installing one after-the-fact in the vehicle.
      The ECU will require inputs from minor sensors and systems that your project vehicle may not have. If left disconnected, the ECU will generate service codes and the engine may not run properly.
Enginewiring.com will re-calibrate your ECM when possible, or use advanced, proprietary methods to eliminate these unnecessary inputs, ensuring that YOUR ENGINE RUNS AT IT'S FULL POTENTIAL!       The affected areas of your harness will then be finished with new split loom tubing. Your vehicle will have a clean, factory appearance.

*** All Prices listed are USD ***
*** ECM/PCM Calibration fees applicable only if we process the Engine Harness that compliments it. ***

GM

    Ecotec
       Harness Conversion $325.00
             PCM Calibration $200.00
    +$20.00 Return Shipping in the United States

    LT1
       F-Body Harness Conversion $275.00
             PCM Calibration 1993 $100.00, 1994-1997 $50.00 (Including Speed Density Conversion LT1 & LT4)
    +$20.00 Return Shipping in the United States
       Y-Body Harness Conversion $375.00
             PCM Calibration 1992-1993 $100.00, 1994-1996 $50.00
    +$20.00 Return Shipping in the United States
       B-Body Harness Conversion $375.00
             PCM Calibration 1994-1997 $50.00 (Including Speed Density Conversion LT1 & LT4)
    +$20.00 Return Shipping in the United States

    LT5
       Harness Conversion all years $375.00
             PCM Calibration all years $100.00
    +$20.00 Return Shipping in the United States

    LS1
       Harness Conversion $375.00
             PCM Calibration $100.00
    +$20.00 Return Shipping in the United States

    LS2-7
       Harness Conversion $425.00
             PCM Calibration $200.00
    +$20.00 Return Shipping in the United States

    Buick V6
       Series I & II Harness Conversion $425.00
             PCM Calibration $100.00
    +$20.00 Return Shipping in the United States
       Series III Harness Conversion $425.00
    +$20.00 Return Shipping in the United States

    Vortec V6 & V8
       1997-2000 Harness Conversion $325.00
             PCM Calibration $100.00
    +$20.00 Return Shipping in the United States
       2001-2007 Harness Conversion $375.00
             PCM Calibration $100.00
    +$20.00 Return Shipping in the United States

    Other GM
       Only the most common engines are listed here, but we support many others.
       Please phone to discuss other projects.

Subaru

    All Series Through 2002 $495.00
       Price includes process of secondary harness that incorporates the alternator on some models.
       These second harnesses will be returned much smaller.
       V.S.S. Simulator included and installed with this conversion.
    +$20.00 Return Shipping in the United States

Honda

    All B,H,F,J - Series engines: $495.00
       Price includes process of secondary harness that incorporates the Fans on some models.
       These second harnesses will be returned much smaller.
       **Please include the antitheft transponder from the ignition switch and a valid key
       from the donor vehicle when anti-theft system is present. **.
    +$20.00 Return Shipping in the United States

Nissan

SR20 All Versions U.S. and JDM $275.00
+$20.00 Return Shipping in the United States

Mitsubishi

    4G37 ,4G63 , 420A, 4G64, 6G72, 4G69, 6G75: $495.00
       Price includes process of secondary harness that incorporates
       the Alternator and several sensors on some models.
       These second harnesses will be returned much smaller.
    +$20.00 Return Shipping in the United States

Gauge Cluster

    Gauge Cluster Harness from the donor car rewired to
    allow transplant of the factory gauges and indicators. $50.00
       We'll require the illumination dimmer from the donor vehicle
       as well so we can make the illumination work in your new vehicle.
    +$10.00 Return Shipping in the United States

Steering Column Harness Conversion

    Give your project the steering column it deserves. $50.00
       Use the factory Turn Signals, Ignition Switch, HI/LO Switch...ect..
    +$10.00 Return Shipping in the United States

Custom Modifications

    We're not TOO set in our ways, if you'd like something special just ask for a quote.
       Check Engine light mounted in the Diagnostic link? Secondary Fan relay?
       Want to supply us with a special wire covering to match the rest of the vehicle?
       The possibilities are endless.........

I don't see my Engine?

    If it can be done, we'll do the engineering and process it!
       We've done everything from Go-Carts to Airplanes.
       Just ask what we can do for your project.